Welcome to the official website of China metal processing!

About us|Sitemap|Collection

Hotline: (+86)769-83811196
(+86)13827205356
Current location:Home > News > FAQ >

Sintering In Powder Metallurgy

Article source:CNC Machining FactoryResponsible editor:adminauthor:Kangding metalPopularity: Publication time:2018-01-16 15:58 font size:【 large middle Small
GKN Powder Metallurgy | A Material Solutions Provider
GKN Powder Metallurgy | A Material Solutions Provider
GKN Powder Metallurgy comprises GKN Sinter Metals, that produces sintered components and Hoeganaes, that manufacturers metal powder.

Industrial: Powder Metallurgy - Copper Powder Consolidation ...
跳到Solid State Sintering - Sintering is the bonding of particles in a mass of powder by atomic or molecular attraction in the solid state through the application of heat. Powders differ from massive metals in having a much greater ratio of surface area to volume. Consequently, the surface energy is greater. During ...

Powder Metallurgy Sintering Considerations
Powder Metallurgy Sintering Considerations
Pure hydrogen gas (H2) is one of the most effective non-air atmospheres for high-temperature sintering (i.e. for thermal powder fusing to form solids at or near their melting point). Hydrogen Furnace Sintering is used widely as part of many powder metallurgy (PM) processes to create parts of extremely ...

Powder Metallurgy - Powder Metal Manufacturing - Sintering WA
Powder Metallurgy aka Powder Metal Manufacturing is the process of blending fine powdered materials, compacting, and then sintering.

A method to rapidly determine the sintering process parameters of ...
A method to rapidly determine the sintering process parameters of ...
2016年10月14日 - A new method, which is called the resistivity method, is applied in this paper to explore the optimum sintering parameters of powder metallurgy (PM) since general methods are always labor-intensive and time-consuming. This method can probe the resistivity of the powder metallurgy samples in real-time ...

Application of Direct Current Plasma Sintering Process in Powder ...
 Direct current (dc) plasma-assisted sintering of metal parts is a promising and relatively new research and development field in powder metallurgy (PM). In the present entry, it is intended to introduce the reader to the main applications of the dc plasma sintering process in PM. To achieve this goal, the ...

Liquid phase sintering mechanism and densification behavior of boron ...
Liquid phase sintering mechanism and densification behavior of boron ...
For powder metallurgy (PM) iron-based materials, boron is an effective element for facilitating liquid phase sintering (LPS). However, the roles of the various alloying elements in the LPS of boron-alloyed PM steel have not yet been fully identified. The main objective of this study was thus to clarify the effects ...

Effects of sintering atmosphere on microstructure and mechanical ...
Powder Metallurgy (P/M) processing offers advantage of low cost net-shaping, relatively low-temperature processing, high material utilization (95%) and the ability to tailor microstructures. P/M stainless steels are generally consolidated through solid state sintering at relatively low temperatures and moderately high ...

CNC machining
CNC machining
CNC machining is an automated machine with a program control system. CNC machining relative to manual processing has a great advantage, such as CNC machining to produce the parts are very accurate and repeatable; CNC machining can produce complex shapes of parts.
CNC machining technology is now widely popular, most of the machining workshop has a CNC machining capacity, typical machining workshop The most common CNC machining methods are: CNC milling, CNC car and CNC EDM line cutting (EDM) ... ... and so on.


Metal stamping
Metal stamping

Metal stamping is the use of presses and molds will be stainless steel, iron, aluminum, copper and other sheet and the opposite material to deformation or fracture, to achieve a certain shape and size of a process. According to the temperature when stamping are: cold stamping and hot stamping in two ways.
Staling process can be divided into process and forming process (also divided into bending, drawing, forming) two categories. The separation process is in the stamping process so that the stamping parts and blank along a certain contour line separating from each other, while the stout material of the quality of the cross section to meet certain requirements; the forming process is such that the stable blank is plastically deformed non-destructive conditions and is converted into the desired finished product shape, and the dimensional tolerances and the like are also need. ... stamping dies include: single-mode, continuous mode and composite mold three. Our products meet the ESR / ESL, PMG, EP, ICC-ES standard, and so on.

Electric scooter
Electric scooter

Electric scooters are the new form of skateboarding after the traditional skateboarding. Electric scooters are very energy efficient, fast charging and far range capability. Vehicle modeling handsome, easy to operate, driving more secure. For those who prefer the easy life friends is definitely a very suitable option, add a little more fun to life. Electric scooters using lithium battery folding, battery life 30 km can easily on the bus, subway, EMU, certification, including: EAC, NOM, CE, CCC ... ... and so on.

Metal mold
Metal mold

Metal mold is in industrial production, is installed in the press on the special tools, through the pressure of the metal material to produce the desired shape of the parts or products, this special tool collectively referred to as metal mold.
Stamping, at room temperature, the use of the mold installed in the press on the material to exert pressure to produce separation or plastic deformation, a pressure processing method so as to obtain the desired parts.
According to the different processing methods, mold can be divided into punching die, bending mold, drawing mold, forming mold and compression mold five categories.
Mold process classification:
(1) molded in a single step stroke of the press, only one kind of step is completed.
(2) the composite mold has only one station, in the press of a trip, in the same station at the same time to complete two or more stamping steps of the mold.
(3) progressive die (also known as continuous mode) in the direction of feeding the blank, with two or more stations, in the press of a trip, In two different steps to complete two or more stamping steps of the mold.